| Technical Support | ||
| Description | Reference Files | |
| The software available here is specific to the model and version of DVR you are using. Please carefully choose the appropriate software. Improper software selection may give undesired results, including causing damage that may not be covered by warranty. |
||
| Network Connection | ||
| Connecting DVR to a Router and SMS Software Setup guide. | Network_Connection.doc | |
| DVR Software Downloads | ||
| New CE-CRK software update. View the Cricket settings guide here. Version 7.24.02_18843 | CE-CRK upgrade | |
| Earlier DVR Sofware versions | ||
| There are 2 versions for CE-DVR040, CE-DCR080, and CE-DVR161 available. If your DVR is version 2.0 or higher, you may use the software version CEDVR161204.zip. Earlier versions see Earlier DVR Software versions below. To determine which hardware version you have, view the PDF file here. | CE-DVR161204 | |
| There are 2 versions for CE-DVR040, CE-DCR080, and CE-DVR161 available. To determine which hardware version you have, view the PDF file here. | CE-DVR161154 | |
| DVR Contender & Pro Series | ||
| SMS Software version 3.43.1 for Contender & Pro Series DVRs. This version should only be used on these models. Windows 2000 or later required. There are separate programs for the Standard (1024x768) and for the Wide (1280x768) screen formats. | SMS Standard Screen (1024x768) SMS Wide Screen (1280x768) | |
| Upgrade software for Pro Series DVRs. This version should only be used on these models. This is a full upgrade designed to be copied to USB drive, then boot the system from the USB drive to perform the upgrade. Version 2.4.18.6 | Pro Upgrade | |
| Upgrade software for Contender Series DVRs. This version should only be used on these models. This is a full upgrade designed to be copied to USB drive, then boot the system from the USB drive to perform the upgrade. Version 2.5.6.14 | Contender Upgrade | |
| Monitor and Graphics Card Driver Software | ||
| Updated Matrox card Drivers for the DL2000 & DL3000 Series 2 LCD Flat Panels (ver 1.13.1.9 - 10.8MB) | win2kxp1130109clinton | |
| Updated Matrox card Drivers for the DL2000 & DL3000 Series 2 LCD Flat Panels (ver 1.13.1.9 - 10.8MB) | win2kxp113109rel | |
| Updated Matrox card Drivers for the DL2000 & DL3000 Series 2 LCD Flat Panels - for 64 bit computer system | win2kxp1130109x64clinton | |
| Onscreen adjustment software for Clinton M-Series grayscale monitors providing access from a remote computer through a standard pass-through serial cable (not a null modem). Additional functions require a password obtained by contacting Clinton Electronics Technical Support at 800-549-6393. In the following column are 2 files. Unzip each file to separate floppy label disk1 and disk2. Insert disk1 into the computer (Computer with Windows 95,98 or XP) and run setup.exe, you should be prompted when to insert disk2. Alternative method if no floppy drive available: Unzip both files into the same directory and run setup.exe from there. |
suser1 suser2 |
|
| Earlier Monitor and Graphics Card Driver Software | ||
| Matrox card Drivers for the DL2000 & DL3000 Series 2 LCD Flat Panels (ver 1.3 - 34.9MB) | DLSeries213 | |
| Matrox card Drivers for the DL2000 & DL3000 Series 2 LCD Flat Panels (ver 1.3.3 - 11.4MB) | WIN2KXP11202CLINTON | |
| Matrox card Drivers for the DL2000 & DL3000 Series 2 LCD Flat Panels (ver 1.3.2 - 34.9MB) | DLSeries213.2 | |
| Matrox card Drivers for the DL2000 & DL3000 Series 2 LCD Flat Panels (ver 1.3.1 - 35.0MB) | DLSeries213.1 | |
| Matrox card Drivers for the DL3000 G200 | G200 | |
| Monitor Manuals | ||
| Portrait 2 Mega-pixel | Portrait 2 Mega-pixel Manual | |
| Landscape 2 Mega-pixel | Landscape 2 Mega-pixel Manual | |
| On Screen Controls (All DS Series) | On Screen Controls Guide | |
| Service Software | Service Software Guide | |